Instructions:
1. Take apart you 360 and remove the 360 shell. (If you dont know how to do this look it up.)
2. Clean the plates, use sand paper afterwards to make sure any deformities will be taken out. 200, then 400, 1500 and 2000 is suggested, if you can find them.
3. Put it in the dishwasher by itself on the top.
4. Setup the area that you will paint in, use spray paint and spray around 7 inches from the xbox, let it dry around half an hour to an hour.
5. Do one last cleaning and put it back together.
Additional tips:
–> When you paint, go side to side.
Link to this post!